Step 1: Clean the treatment area, and use a razor to shave off the hair in need of care. Make sure your skin is compleletly dry before applying the device.
Step 2: Connect the power cord to the adapter, and insert the plug into a power outlet.
Step 3: Short press the On-Off button on the side of the host to turn on the device. The product has five intensity levels, press ON/OFF to adjust the intensity level, the higher the level, the greater the energy, the faster the effect. At first, it is suggested to start from level 1, and it can be gradually strengthened to the desired effect.
Step 4: Goggle up to protect your eyes.
Step 5: Place the light outlet on the skin to be treated and apply it vertically. The hair removal sensor light will light up to indicate that it is fully in contact. Press the flash button to start the hair removal process. If the white light is not turned on, it means that the lamp head is not completely attached to the skin, and the instrument will not emit light. Step 6: After hair removal is complete, press and hold the On-Off button for 1 to 2 seconds to turn off the device (never pull the plug without turning off the machine to avoid damage).